CNC fiber laser cutting machine is a complete set of laser cutting equipment, which is integrated with fiber laser, chillers, fiber cutting head, cutting machine tools, control system, water system, air extraction system and so on. The whole machine adopts fixed workpiece and movable gantry structure. It is a two-axis, three-axis controlled CNC laser cutting machine. Among them, the X Y axis linkage realizes the plane cutting feed Z axis floating tracking workpiece surface. Four CNC shafts of the equipment are guided by rolling guideways, and the cutting plate part X, Y, Z axis is driven by AC servo gear rack, among which X, Z axis is driven by AC servo gear rack. The main bed, Y shaft adopts steel structure beam, dynamic performance, among which laser cutting head, AC servo motor, ball screw pair, rolling guide pair, reducer, gear and rack pair all choose well-known brand. The CNC system adopts the domestic brand laser special numerical control system, configure the professional cutting control software and the auxiliary programming software. Compact structure, sufficient stiffness, good reliability and high cutting efficiency.
The precision levels and edge quality achieved with laser cutting machines are better than traditional cutting methods, as the laser beam will not wear during the laser cutting process. Laser cutting technology also enables us to cut complex shapes without the need for tooling and at a similar or faster speed than other cutting methods.
Smaller focus diameter and high work efficiency.
2-3times faster than YAG or Co2 Laser.
Photoelectric conversion rate is up to 25%- 30%.Low electric power consumption, it is only about 20%-30% of traditional co2 laser cutting machine.
Fiber line transmission, no adjustment of optical path.
Compare with co2 laser cutting machine, fiber laser cutting machine has three times photoelectric conversion efficiency.
Compact design, easy to flexible manufacture requirements.
Adopting the top world import fiber lasers, stable performance, key parts can reach 100000 hours.
Fiber line transmission no need reflect lens, save maintenance cost.
The CNC fiber laser cutting machine is suitable for cutting stainless steel, carbon steel, aluminum, alloy steel, silicon steel, galvanized steel plate, aluminum alloy, titanium alloy and other metal materials.
|
Parts Name |
Picture |
Brand & Origin |
Function |
|
Laser sourse |
 |
& Raycus |
1:Direct control of all the fiber laser functions; 2:Synchronized control of the laser source; 3:Overall power control; 4:High speed perforation; 5:Edge machining function; 6:Cutting data library; 7:High speed |
|
Cutting Head |
  |
  |
1: Automatically focal position adjustment; 2:No-contact height sensor; 3:Horizontal lens adjustment; 4: Switzerland brand |
|
Control System |
 |
Cypcut(China. Shanghai) |
1:Recognized by over 300 domestic and foreign laser companies; 2:Approved by over 100000 clients; 3:Stable operation on over 20000 sets cutting machine;ple 4:Able to complete from the design,map and process; 5:Simple,efficient,powerful and reliable |
|
Square Guide Rail |
 |
HIWIN(Taiwan) |
1:Precise design,easy to install; 2:High rigidity and overweight load capacity; 3:Low noise,smooth movement |
|
Control Center |
 |
Advantech(Taiwan) |
1:CPU:G1820，2:RAM:4G, 3:SSD:120G |
|
Rack and Pinion system |
 |
 
YYC/KH(Taiwan) |
1: High hardness; 2: 6H precision; 3: easy to install. |
|
Driving System |
 |
Panasonic Or Yaskawa (Japan) |
1:Servo Motor with high precise; 2:Able to control cutting speed and position; 3:Stable running,lower speed without vibration phenomenon; 4:Better overload capacity |
|
Reducer |
 |
Shimpo(Japan) |
1:Helical gear replacing previous spur gear,lower noice; 2:Back to the gap below 0.05 are points; 3:Low pulsating roration smooth |
|
Oil Injection System |
 |
China.Zhejiang |
After using some time,Rack&Pinion and guide rails always need maintained by inject oils.Make sure the machine keep moving fluently and in good precision. |
|
Machine Tool Process |
 |
Self-research and development |
1：Steel welding 2：tempering processing |
|
Machine crossbeam |
 |
Self-research and development |
1：Steel welding 2：tempering processing |
|
Pneumatic Chuck |
 |
 |
Pneumatic chuck: Dairuike, China famous brand (1) Easy application; (2) High safety; (3) Strong stability; (4) Gears are built-in for dust prevention and low noise. |
|
Parameter |
Value |
|
Laser Power(Option) |
1000W/1500W/2000W/2500W/3000W/4000W/6000W |
|
Available Bed Size model |
3015/3016/4015/4020/6015/6020/6025/8025/10025/12025 |
|
Laser Medium |
YVO4 |
|
Laser Wavelength |
1070nm |
|
Rated Output Power |
1000W |
|
Beam Quality |
<0.373mrad |
|
X-axis Rout(Option) |
3000mm/4000mm/6000mm |
|
Y-axis Rout(Option) |
1500mm/2000mm |
|
Z-axis Rout |
120mm |
|
X/Y-axis Positioning Accuracy |
≤±0.03mm/m |
|
X/Y-axis Repositioning Accuracy |
≤±0.02mm/m |
|
Max.Moving Speed |
120m/min |
|
Max.Load |
1500KG |
|
Phase |
3 |
|
Rated Voltage |
380V |
|
Power Frequency |
50Hz |
|
Protection Level |
IP54 |
|
Maximum Pipe Cutting Diameter (mm) |
round pipe: Ф15~220; square pipe: 150*150 |
|
Chuck type |
penumatic chuck |
Copyright © Techma360 2021. All rights reserved .
Powered by Egainz